Lexus NX: Diagnostic Trouble Code Chart
Lexus NX Service Manual / Power Source & Network / Networking / Lin Communication System / Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
LIN Communication System| DTC No. | Detection Item | Link |
|---|---|---|
| B1206 | P/W Master Switch Communication Stop | |
| B1273 | Sliding Roof ECU Communication Stop | |
| B2321 | Driver Side Door ECU Communication Stop | |
| B2322 | Front Passenger Side Door ECU Communication Stop | |
| B2323 | Rear Door RH ECU Communication Stop | |
| B2324 | Rear Door LH ECU Communication Stop | |
| B2325 | LIN Communication Bus Malfunction | |
| B2785 | Communication Malfunction between ECUs Connected by LIN | |
| B2786 | No Response from Steering Lock ECU | |
| B2789 | No Response from ID BOX | |
.gif)
READ NEXT:
P/W Master Switch Communication Stop (B1206)
DESCRIPTION This DTC is stored when LIN communication between the multiplex network master switch assembly and main body ECU (multiplex network body ECU) stops for 10 seconds or more. DTC No. Det
Sliding Roof ECU Communication Stop (B1273)
DESCRIPTION This DTC is stored when LIN communication between the sliding roof drive gear sub-assembly and main body ECU (multiplex network body ECU) stops for 10 seconds or more. DTC No. Detecti
Driver Side Door ECU Communication Stop (B2321)
DESCRIPTION This DTC is stored when LIN communication between the front power window regulator motor assembly LH and main body ECU (multiplex network body ECU) stops for 10 seconds or more. DTC No.
SEE MORE:
Performance Damper
ComponentsCOMPONENTS ILLUSTRATION *1 SUSPENSION TOWER DAMPER - - N*m (kgf*cm, ft.*lbf): Specified torque - - RemovalREMOVAL PROCEDURE 1. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY Click here 2. REMOVE SUSPENSION TOWER DAMPER (a) Remove the 2 nuts and the suspension tower d
Rear Door LH Entry Lock Function does not Operate
DESCRIPTION If the entry lock function does not operate for the rear door LH only, but the entry unlock function operates, the request code is being transmitted properly from the rear door LH. In this case, there may be a problem related to the lock sensor (connection between the certification ECU (
© 2016-2026 Copyright www.lexunx.com
