Lexus NX: Diagnostic Trouble Code Chart
Lexus NX Service Manual / Vehicle Exterior / Acoustic Vehicle Alerting System / Acoustic Vehicle Alerting System / Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Vehicle Proximity Notification System| DTC No. | Detection Item | Link |
|---|---|---|
| B1350 | Speaker Circuit | |
| U0129 | Lost Communication with Brake System Control Module | |
| U0140 | Lost Communication with Body Control Module | |
| U0293 | Lost Communication with Hybrid/EV Powertrain Control Module | |
.gif)
READ NEXT:
Speaker Circuit (B1350)
DESCRIPTION The vehicle approaching speaker assembly circuit consists of the vehicle approaching speaker controller and vehicle approaching speaker assembly. This DTC is stored when a malfunction is d
Lost Communication with Brake System Control Module (U0129,U0140,U0293)
DESCRIPTION These DTCs are stored when the CAN communication system is malfunctioning. DTC No. Detection Item DTC Detection Condition Trouble Area U0129 Lost Communication with Brake Sy
There is No Sound Made
DESCRIPTION Based on signals received from each ECU, the vehicle approaching speaker controller outputs warning sounds through the vehicle approaching speaker assembly. WIRING DIAGRAM CAUTION / NOTIC
SEE MORE:
Occupant Classification ECU Malfunction (B1795)
DESCRIPTION DTC B1795 is stored when a malfunction is detected in the occupant detection ECU. Troubleshoot DTC B1771 first when both DTCs B1771 and B1795 are present. DTC No. Detection Item DTC Detection Condition Trouble Area B1795 Occupant Classification ECU Malfunction Occupant d
Slave Module Horizontal Axis Misalignment (C1AC2)
DESCRIPTION This DTC is stored when the angle of the blind spot monitor sensor RH deviates more than the allowable range from the horizontal axis. HINT: If a drum tester such as a speedometer tester, brake/speedometer combination tester or chassis dynamometer is used with the blind spot monitor main
© 2016-2026 Copyright www.lexunx.com
