Lexus NX: Diagnostic Trouble Code Chart

DIAGNOSTIC TROUBLE CODE CHART

AFS (Adaptive Front-Lighting System)

DTC No.

Detection Item

Link

B2410

Headlight Swivel ECU LH Communication

B2411

Headlight Swivel ECU RH Communication

B2412

Headlight Swivel Motor LH

B2413

Headlight Swivel Motor RH

B2424

Headlight Beam Level Control Motor LH Lost Communication

B2425

Headlight Beam Level Control Motor RH Lost Communication

READ NEXT:

 Headlight Swivel ECU LH Communication (B2410,B2411,B2424,B2425)

DESCRIPTION Each headlight ECU sub-assembly and headlight swivel and leveling motor communicate via LIN communication. The headlight swivel and leveling motor operates according to power supplied and

 Headlight Swivel Motor LH (B2412,B2413)

DESCRIPTION The headlight ECU sub-assembly LH sends automatic headlight beam level control signals to each headlight swivel and leveling motor via LIN communication. Each headlight ECU sub-assembly an

 Automatic Headlight Beam Level Control System (for Triple Beam Headlight)

SEE MORE:

 Installation

INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. INSTALL REAR DOOR REAR WINDOW FRAME MOULDING LH (a) Install a new rear door rear window frame moulding LH. (b) Install a nose piece to an air

 Installation

INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the LH side and RH side. The following procedure is for the LH side. PROCEDURE 1. INSTALL FRONT SKID CONTROL SENSOR WIRE LH (w/ AVS) (a) Install the sensor clamp as follows. (1) Install the grommet to the absorber brack

© 2016-2025 Copyright www.lexunx.com