Lexus NX: Diagnostic Trouble Code Chart
Lexus NX Service Manual / Vehicle Exterior / Lighting (ext) / Lighting System (for Single Beam Headlight) / Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Lighting System| DTC No. | Detection Item | Link |
|---|---|---|
| B1244 | Light Sensor Circuit Malfunction | |
| B2430 | LED Headlight LH Circuit Malfunction | |
| B2431 | LED Headlight RH Circuit Malfunction | |
| U012587 | Lost Communication with Multi-axis Acceleration Sensor Module Missing Message | |
| U012987 | Lost Communication with Brake System Control Module Missing Message | |
| U014087 | Lost Communication with Body Control Module Missing Message | |
| U023587 | Lost Communication with Cruise Control Front Distance Range Sensor Missing Message | |
| U029387 | Lost Communication With Hybrid Powertrain Control Module Missing Message | |
.gif)
READ NEXT:
Vehicle Control History
VEHICLE CONTROL HISTORY CHECK THE VEHICLE CONTROL HISTORY (LIGHTING SYSTEM) HINT:
The vehicle control history data (lighting system) stores the history of the reject function and system protection
Light Sensor Circuit Malfunction (B1244)
DESCRIPTION The automatic light control sensor detects ambient light, converts it into an electrical signal and outputs it to the main body ECU (multiplex network body ECU). The main body ECU (multipl
LED Headlight LH Circuit Malfunction (B2430,B2431)
DESCRIPTION The illumination of the low beam headlights is controlled by the main body ECU (multiplex network body ECU). When the headlights are turned on, the main body ECU (multiplex network body EC
SEE MORE:
Terminals Of Ecu
TERMINALS OF ECU CHECK FOLD SEAT CONTROL ECU (REAR RIGHT SEAT) (a) Disconnect the h3 and h4 fold seat control ECU (rear right seat) connectors. (b) Measure the resistance and voltage according to the value(s) in the table below. Terminal No. (Symbol) Wiring Color Terminal Description Condi
Inspection
INSPECTION PROCEDURE 1. INSPECT BACK DOOR OPENER SWITCH ASSEMBLY (a) Check the operation of the opener switch. (1) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Switch Condition Specified Condition 1 (UL) - 2 (E) Back doo
© 2016-2026 Copyright www.lexunx.com
