Lexus NX: Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Front Power Seat Control System (w/ Memory)
DTC No. | Detection Item | Link |
B2650 | Slide Sensor Malfunction | |
B2658 | Short in Sensor with Motor Power Supply Circuit | |
READ NEXT:
DESCRIPTION When the front power seat switch LH does not receive a sensor signal despite forward or backward movement of the seat by power seat motor operation, this DTC is stored. DTC No. Detect
DESCRIPTION This DTC is stored when a power seat motor operates (a position control sensor is being supplied with power) and the power supply voltage does not rise to the specified value. DTC No.
DESCRIPTION Signals are input into the front power seat switch LH. The built-in ECU manages the signals received from the power seat switch, and operates each motor. If the front power seat switch LH
SEE MORE:
SYSTEM DIAGRAM Communication Table Sender Receiver Signal Communication Line Air conditioning amplifier assembly Hybrid vehicle control ECU Heater idle up request signal CAN ECO mode switch information signal Engine ON request signal Charging control inhibit sign
DISASSEMBLY CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE 1. REMOVE REAR LIGHT GASKET LH (a) Remove the rear light gasket LH. NOTICE: The rear light gasket LH cannot be reused. 2. REMOVE R
© 2016-2024 Copyright www.lexunx.com