Lexus NX: Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Seat Heater System
DTC No. | Detection Item | Link |
B14C0 | Front Right Seat Heat Sensor Circuit | |
B14C1 | Front Left Seat Heat Sensor Circuit | |
B14C2 | Rear Right Seat Heat Sensor Circuit | |
B14C3 | Rear Left Seat Heat Sensor Circuit | |
READ NEXT:
DESCRIPTION Output to the front seat cushion heater temperature sensor stops if one of the following occurs: 1) the temperature sensor is open or shorted; or 2) the temperature sensor is damaged and i
DESCRIPTION Output to the front seat cushion heater temperature sensor stops if one of the following occurs: 1) the temperature sensor is open or shorted; or 2) the temperature sensor is damaged and i
DESCRIPTION Power supply to the temperature sensor built into the rear seat cushion heater stops if one of the following occurs: 1) an open or short occurs in the temperature sensor circuit; or 2) the
SEE MORE:
DESCRIPTION The main body ECU (multiplex network body ECU) receives seat memory switch signals from the outer mirror control ECU assembly (for Driver Side) via CAN communication. If the seat memory SET switch is being pressed when one of the M1, M2 or M3 switches is pressed, or if one of the M1, M2
DISASSEMBLY CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE 1. REMOVE FRONT ROOF RACK LEG CUSHION LH (a) Remove the front roof rack leg cushion LH. *1 Double-sided Tape 2. REMOVE
© 2016-2024 Copyright www.lexunx.com