Lexus NX: Fog Light Assembly (except Sport Package)
Lexus NX Service Manual / Vehicle Exterior / Lighting (ext) / Fog Light Assembly (except Sport Package)
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 FOG LIGHT ASSEMBLY LH *2 FRONT BUMPER ASSEMBLY
Removal
REMOVAL CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
PROCEDURE 1. REMOVE FRONT BUMPER ASSEMBLY Click here 2
Inspection
INSPECTION PROCEDURE 1. INSPECT FOG LIGHT ASSEMBLY LH (a) Apply battery voltage to the connector and check the light illumination condition. OK: Condition Specified Condition Battery posi
SEE MORE:
Manual(sos)switch
InspectionINSPECTION PROCEDURE 1. REMOVE MAP LIGHT ASSEMBLY Click here 2. INSPECT MAP LIGHT ASSEMBLY (a) Check the resistance. (1) Measure the resistance according to the value(s) in the table below. *a Component without harness connected (Map Light Assembly) - - Resistance: Test
Idle Control System (P0505)
DESCRIPTION The idle speed is controlled by the electronic throttle control system. The electronic throttle control system is comprised of: 1) one valve type throttle body with motor assembly; 2) the throttle actuator, which operates the throttle valve; 3) the throttle position sensor, which detects
© 2016-2026 Copyright www.lexunx.com
