Lexus NX: Installation
Lexus NX Service Manual / Vehicle Exterior / Lighting (ext) / Fog Light Assembly (except Sport Package) / Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH and LH sides.
- The procedure described below is for the LH side.
PROCEDURE
1. INSTALL FOG LIGHT ASSEMBLY LH
(a) Attach the guide.
(b) Install the fog light assembly LH with the 2 screws.
2. INSTALL FRONT BUMPER ASSEMBLY
Click here .gif)
READ NEXT:
Precaution
PRECAUTION NOTICE: When disassembling the fog light assembly, use static electricity countermeasures SST (desktop anti-static mat set) and observe all precautions to prevent damage to the system by el
Components
COMPONENTS ILLUSTRATION *1 FOG LIGHT ASSEMBLY LH - - ILLUSTRATION *1 FOG LIGHT GASKET *2 FOG LIGHT LENS LH *3 FOG LIGHT UNIT LH *4 PIVOT COLLAR ● Non-reusable
SEE MORE:
Intake System
On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE 1. INSPECT INTAKE SYSTEM HINT: Perform "Inspection After Repair" after repairing air leaks in the intake system. Click here (a) Check that there are no vacuum leaks at the points shown in the illustration.
Installation
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE 1. INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH (a) Attach the 2 clips to install the power back door sensor assembly LH. (b) Install the 4 screws
© 2016-2025 Copyright www.lexunx.com
