Lexus NX manuals

Lexus NX: Installation

Lexus NX Service Manual / Vehicle Exterior / Lighting (ext) / Fog Light Assembly (for Sport Package) / Installation

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure described below is for the LH side.

PROCEDURE

1. INSTALL FOG LIGHT ASSEMBLY LH

(a) Install the fog light assembly LH with the 3 screws.

(b) Attach each hose clamp.

*A

LH Side

*B

RH Side

2. INSTALL FRONT BUMPER ASSEMBLY

Click here

READ NEXT:

 Front Side Marker Light Bulb(for Single Beam Headlight)

ReplacementREPLACEMENT CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. REMOVE FRONT SIDE MARKER LIGHT

 Front Turn Signal Light Bulb(for Bulb Type Turn Signal Light)

ReplacementREPLACEMENT CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. REMOVE FRONT RADIATOR SIDE AIR

 Hazard Warning Switch

InspectionINSPECTION PROCEDURE 1. INSPECT AIR CONDITIONING CONTROL ASSEMBLY (HAZARD WARNING SWITCH) (a) Remove the air conditioning control assembly. Click here (b) Inspect the hazard warning swit

SEE MORE:

 Diagnosis System

DIAGNOSIS SYSTEM CHECK DLC3 (a) Check the DLC3. Click here INSPECT AUXILIARY BATTERY VOLTAGE (a) Measure the auxiliary battery voltage. Standard voltage: 11 to 14 V (power switch off) If the voltage is below 11 V, recharge or replace the auxiliary battery.

 Back Door Motor Circuit (B2220)

DESCRIPTION This DTC is output when the multiplex network door ECU detects a malfunction in the motor built into the power back door unit assembly set LH or RH. DTC No. Detection Item DTC Detection Condition Trouble Area B2220 Back Door Motor Circuit Motor malfunction detected in po

© 2016-2025 Copyright www.lexunx.com