Lexus NX manuals

Lexus NX: Precaution

Lexus NX Service Manual / Vehicle Exterior / Lighting (ext) / Automatic High Beam System / Precaution

PRECAUTION

HANDLING PRECAUTIONS FOR FORWARD RECOGNITION CAMERA

(a) The automatic high beam system uses the forward recognition camera. For precautions related to the forward recognition camera, refer to Precaution for Front Camera System.

Click here

READ NEXT:

 Parts Location

PARTS LOCATION ILLUSTRATION *1 FORWARD RECOGNITION CAMERA *2 BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY (SKID CONTROL ECU) *3 HEADLIGHT ASSEMBLY LH *4 HEADLIGHT ASSEMBLY RH *5

 System Diagram

SYSTEM DIAGRAM

 System Description

SYSTEM DESCRIPTION AUTOMATIC HIGH BEAM SYSTEM (a) General The automatic high beam system enhances the illumination of the area in front of the vehicle to improve visibility for the driver. It works by

SEE MORE:

 Drive Motor "B" Position Sensor Angle Malfunction (P1CAE-715,P1CB1-798,P1CB4-799)

DESCRIPTION The inverter with converter assembly (MG ECU) monitors its internal operation and detects malfunctions. DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate P1CAE-715 Drive Motor "B" Position Sensor Angle Malfunction Rear motor resolver an

 Dtc Check / Clear

DTC CHECK / CLEAR CHECK FOR DTC (a) Connect the Techstream to the DLC3. (b) Turn the power switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / AFS / Trouble Codes. Body Electrical > AFS > Trouble Codes (e) Check for DTCs. CLEAR DTC (a) Connect the Techs

© 2016-2026 Copyright www.lexunx.com