Lexus NX: Precaution
PRECAUTION
FOR OPERATION OF ELECTRICAL ITEMS RESTRICTED
NOTICE:
-
If the auxiliary battery voltage is low, the seat heater system may not operate. When "High Power Consumption / Partial Limit On AC/Heater Operation" is displayed on the multi-information display in the combination meter assembly, inspect the auxiliary battery, referring to On-vehicle Inspection for the charging system.
Click here
.gif)
HINT:
If the auxiliary battery voltage is low, "Operation Limitation Control History Count (Level 1)" and "Operation Limitation Control History Count (Level 2) is counted.
Click here
-
If the auxiliary battery voltage is low, the seat heater system may not operate. Refer to Data List for the power steering system.
for Manual Tilt and Manual Telescopic Steering Column Power: Click here
for Power Tilt and Power Telescopic Steering Column: Click here
READ NEXT:
Parts Location
PARTS LOCATION ILLUSTRATION *A w/ Rear Seat Heater - - *1 AIR CONDITIONING CONTROL ASSEMBLY *2 SEAT HEATER SWITCH (for Driver Side) *3 SEAT HEATER SWITCH (for Front Passenger
System Diagram
SYSTEM DIAGRAM for Front: for Rear (w/ Rear Seat Heater):
System Description
SYSTEM DESCRIPTION FRONT SEAT HEATER (a) By operating the seat heater switch on the air conditioning control assembly, the temperature can be controlled within the range of 32 to 43°C (89 to 109°F).
SEE MORE:
On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT THROTTLE WITH MOTOR BODY ASSEMBLY (a) Put the engine in inspection mode (maintenance mode). Click here (b) Start the engine and check that the MIL is not illuminated. After the engine is warmed up, check that the idle speed is within the specified range w
On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT AIR CONDITIONER PRESSURE SENSOR (a) Check the wire harness. *a Component without harness connected (Air Conditioner Pressure Sensor) *b Component without harness connected (Air Conditioning Amplifier Assembly) (1) Disconnect the A18 air condi
© 2016-2026 Copyright www.lexunx.com
