Lexus NX: System Diagram

SYSTEM DIAGRAM

Communication Table

Transmitter

Receiver

Signal

Communication Method

Multi-display Assembly

Radio Receiver Assembly

Windshield deicer switch signal

GVIF

Radio Receiver Assembly

Air Conditioning Amplifier Assembly

Windshield deicer switch signal

CAN

READ NEXT:

 System Description

SYSTEM DESCRIPTION GENERAL The windshield deicer thin heater wires are attached to the inside of the windshield glass to help deice the window surface more quickly. The indicator light illuminates whi

 How To Proceed With Troubleshooting

CAUTION / NOTICE / HINT HINT: Use the following procedure to troubleshoot the windshield deicer system. *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP NEXT

 Operation Check

OPERATION CHECK CHECK WINDSHIELD DEICER SYSTEM (a) Turn the power switch on (IG). (b) Check that the windshield deicer becomes warm by operating the windshield deicer switch of the multi-display assem

SEE MORE:

 Check Bus 5 Line for Short to +B

DESCRIPTION There may be a short circuit between one of the CAN bus lines and +B when there is no resistance between terminal 15 (CA5H) of the central gateway ECU (network gateway ECU) and terminal 16 (BAT) of the DLC3, or terminal 16 (CA5L) of the central gateway ECU (network gateway ECU) and termi

 Ignition Coil "A" Primary / Secondary Circuit (P0351-P0354)

DESCRIPTION HINT: These DTCs indicate malfunctions relating to the primary circuit. If DTC P0351 is output, check the No. 1 ignition coil assembly (No. 1 cylinder) circuit. If DTC P0352 is output, check the No. 2 ignition coil assembly (No. 2 cylinder) circuit. If DTC P0353 is output, check

© 2016-2026 Copyright www.lexunx.com