Lexus NX: Windshield Deicer System
- Parts Location
- System Diagram
- System Description
- How To Proceed With Troubleshooting
- Operation Check
- Problem Symptoms Table
- Terminals Of Ecu
- Data List / Active Test
- Windshield Deicer does not Operate
READ NEXT:
Parts Location
PARTS LOCATION ILLUSTRATION *1 FRONT WIPER DEICER RELAY *2 AIR CONDITIONING AMPLIFIER ASSEMBLY *3 MULTI-DISPLAY ASSEMBLY *4 RADIO RECEIVER ASSEMBLY *5 WINDSHIELD GLASS - WIND
System Diagram
SYSTEM DIAGRAM Communication Table Transmitter Receiver Signal Communication Method Multi-display Assembly Radio Receiver Assembly Windshield deicer switch signal GVIF Radio Re
System Description
SYSTEM DESCRIPTION GENERAL The windshield deicer thin heater wires are attached to the inside of the windshield glass to help deice the window surface more quickly. The indicator light illuminates whi
SEE MORE:
Installation
INSTALLATION CAUTION / NOTICE / HINT CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
If the front seat cushion airbag assembly RH was deployed, replace the front seat cushion airbag assembly RH, separate type front seat cushion spring assembly, separate type fro
Cold Start Ignition Timing Performance (P050B)
MONITOR DESCRIPTION This monitor will run when the engine is started at an engine coolant temperature of -10 to 50°C (14 to 122°F). The DTC is stored after the engine idles for 13 seconds (2 trip detection logic). The DTC is designed to monitor the ignition timing at cold start. When the engine is
© 2016-2025 Copyright www.lexunx.com
