Lexus NX: Camshaft Oil Control Valve
Lexus NX Service Manual / Engine & Hybrid System / 2ar-fxe (engine Control) / Camshaft Oil Control Valve
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY *2 NO. 1 ENGINE COVER SUB-ASSEMBLY *3 O-RING - - N*m (kgf*cm, ft.*lbf): Specified torque ● Non-re
On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (a) Connect the Techstream to the DLC3. (b) Turn the Techstream on. (c) Put the engine in inspection mode (mainten
Removal
REMOVAL PROCEDURE 1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Click here 2. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (a) Disconnect the camshaft timing oil control valve assembly connect
SEE MORE:
DC / DC Converter Status Circuit High Input (P0A10-263)
DESCRIPTION Refer to the description for DTC P0A08-264. Click here The hybrid vehicle control ECU sends a signal to the DC/DC converter to prohibit its control and receives signals indicating a normal or abnormal condition of the 12 V charging system via the NODD signal line. If the DC/DC convert
Installation
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
A bolt without a torque specification is shown in the standard bolt chart.
Click here PROCEDURE 1. CLEAN QUARTER WINDOW ASSEMBLY LH (a) Clean the o
© 2016-2026 Copyright www.lexunx.com
