Lexus NX: Cooling Fan Motor
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 COOLING FAN ECU *2 COOLING FAN MOTOR *3 COOLING FAN WIRE *4 FAN *5 NO. 2 COOLING FAN MOTOR *6 NO. 2 FAN *7 COOLING FAN MOTOR INSULATOR
On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT COOLING FAN MOTOR (a) Disconnect the cooling fan motor connector. (b) Check that the fan rotates smoothly by hand. (c) Check that the cooling fan motor tu
Removal
REMOVAL PROCEDURE 1. REMOVE FAN SHROUD WITH COOLING FAN Click here 2. REMOVE COOLING FAN WIRE (a) Disconnect the cooling fan ECU connector. (b) Detach the 3 clamps and remove the cool
SEE MORE:
Installation
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE 1. INSTALL FRONT DOOR OUTSIDE MOULDING SUB-ASSEMBLY LH (a) Attach the 3 claws to install the front door outside moulding sub-assembly LH. (b) In
Open Circuit in Main Relay 1 (C1311,C1312)
DESCRIPTION The ABS main relay supplies power to the changeover solenoid and the linear solenoid. The ABS main relay remains on for approximately 2 minutes after the power switch is turned off and the input of brake pedal operation signals stops, and supplies power to the system to keep it ready to
© 2016-2026 Copyright www.lexunx.com
