Lexus NX: Cylinder Block
READ NEXT:
Precaution
PRECAUTION HINT:
Any digits beyond the 0.01 mm (1/1000 in.) place for standard, minimum and maximum values should be used as a reference only.
When both standard and maximum or minimum values are
Components
COMPONENTS ILLUSTRATION *1 CONNECTING ROD BEARING *2 CRANKSHAFT *3 CRANKSHAFT BEARING *4 CRANKSHAFT PULLEY SET KEY *5 CRANKSHAFT THRUST WASHER *6 NO. 1 OIL NOZZLE SUB-ASS
Inspection
INSPECTION PROCEDURE 1. INSPECT CYLINDER BLOCK FOR WARPAGE (a) Using a precision straightedge and feeler gauge, measure the warpage of the surface that contacts the cylinder head gasket. Maximum wa
SEE MORE:
Removal
REMOVAL PROCEDURE 1. REMOVE MAP LIGHT ASSEMBLY (PERSONAL LIGHT) (a) Using moulding remover D, detach the 4 clips. (b) Disconnect the connectors and remove the map light assembly (personal light).
Installation
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
PROCEDURE 1. INSTALL LICENSE PLATE LIGHT ASSEMBLY LH (a) Attach the 2 claws to install the license plate light assembly LH. (b) Connect the connector.
© 2016-2026 Copyright www.lexunx.com
