Lexus NX: Diagnostic Trouble Code Chart
Lexus NX Service Manual / Vehicle Exterior / Lighting (ext) / Automatic High Beam System / Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Automatic High Beam System| DTC No. | Detection Item | Link |
|---|---|---|
| B124B | Automatic High Beam System | |
| B124C | Automatic High Beam Camera | |
| U023A | Lost Communication with Front Camera Module | |
.gif)
READ NEXT:
Vehicle Control History
VEHICLE CONTROL HISTORY CHECK VEHICLE CONTROL HISTORY HINT: The vehicle control history data stores the history of the reject function and system protection operations.
for Triple Beam Headlight:
C
Automatic High Beam System (B124B)
DESCRIPTION The main body ECU (multiplex network body ECU) determines the status of the automatic high beam system based on the automatic high beam system signal from the forward recognition camera.
Automatic High Beam Camera (B124C)
DESCRIPTION The main body ECU (multiplex network body ECU) detects a high beam headlight illumination request signal of the automatic high beam system from the forward recognition camera. DTC No.
SEE MORE:
Components
COMPONENTS ILLUSTRATION *1 DECK FLOOR BOX LH *2 REAR DECK FLOOR BOX *3 NO. 3 DECK BOARD SUB-ASSEMBLY *4 NEGATIVE AUXILIARY BATTERY TERMINAL N*m (kgf*cm, ft.*lbf): Specified torque - - ILLUSTRATION *1 MULTIPLEX TILT AND TELESCOPIC ECU *2 LOWER STEERING COLU
Generator Control Module (P0A1A-151,P0A1C-709)
DESCRIPTION The MG ECU, which is built into the inverter with converter assembly, monitors its internal operation and will store DTCs if the system is malfunctioning. If any of the following DTCs are output, replace the inverter with converter assembly. DTC No. Detection Item DTC Detection Co
© 2016-2026 Copyright www.lexunx.com
