Lexus NX: Vehicle Control History
Lexus NX Service Manual / Vehicle Exterior / Lighting (ext) / Automatic High Beam System / Vehicle Control History
VEHICLE CONTROL HISTORY
CHECK VEHICLE CONTROL HISTORY
HINT:
The vehicle control history data stores the history of the reject function and system protection operations.
-
for Triple Beam Headlight:
Click here
.gif)
-
for Single Beam Headlight:
Click here
READ NEXT:
Automatic High Beam System (B124B)
DESCRIPTION The main body ECU (multiplex network body ECU) determines the status of the automatic high beam system based on the automatic high beam system signal from the forward recognition camera.
Automatic High Beam Camera (B124C)
DESCRIPTION The main body ECU (multiplex network body ECU) detects a high beam headlight illumination request signal of the automatic high beam system from the forward recognition camera. DTC No.
Lost Communication with Front Camera Module (U023A)
DESCRIPTION These DTCs are stored when the CAN communication system is malfunctioning. DTC No. Detection Item DTC Detection Condition Trouble Area U023A Lost Communication with Front Ca
SEE MORE:
Outside Air Temperature Sensor (C1652)
DESCRIPTION When a malfunction signal sent from the air conditioning system via CAN communication is detected by the clearance warning ECU assembly, DTC C1652 is stored. DTC No. Detection Item DTC Detection Condition Trouble Area C1652 Outside Air Temperature Sensor Ambient temperat
Reassembly
REASSEMBLY PROCEDURE 1. INSTALL STIFFENING CRANKCASE RING PIN NOTICE: It is not necessary to remove the ring pin unless it is being replaced. *a Protrusion Height (a) Using a plastic-faced hammer, tap in 2 new ring pins until they stop. Standard protrusion height: 4.3 to 5.3 mm (0.169 to 0
© 2016-2026 Copyright www.lexunx.com
