Lexus NX: Fuel Pump
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 FUEL SUCTION TUBE ASSEMBLY *2 FUEL TANK MAIN TUBE SUB-ASSEMBLY *3 FUEL TANK VENT TUBE SET PLATE *4 TUBE JOINT CLIP *5 FUEL HOSE *6 GASKET
Removal
REMOVAL PROCEDURE 1. REMOVE FUEL TANK ASSEMBLY Click here 2. DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY (a) Remove the tube joint clip, then disconnect the fuel tank main tube sub-assembly from
Disassembly
DISASSEMBLY CAUTION / NOTICE / HINT NOTICE: Do not try to remove the black nylon tube as it is welded to the fuel suction tube assembly. Click here PROCEDURE 1. REMOVE NO. 1 FUEL SUB-TANK (a) Di
SEE MORE:
Diagnosis System
DIAGNOSIS SYSTEM CHECK DLC3 (a) Check the DLC3. Click here INSPECT AUXILIARY BATTERY VOLTAGE (a) Check the auxiliary battery voltage. Standard voltage: 11 to 14 V (power switch off) If the voltage is below 11 V, recharge or replace the auxiliary battery.
Installation
INSTALLATION PROCEDURE 1. INSTALL STOP LIGHT SWITCH ASSEMBLY (a) Turn the stop light switch assembly in the clockwise direction until it reaches the standard shaft protrusion amount and temporarily install it. Standard: 0.5 to 1.7 mm (0.0197 to 0.0669 in.) NOTICE: Do not depress the brake pedal.
© 2016-2026 Copyright www.lexunx.com
