Lexus NX: Rear Seatback Heater(for Manual Seat)
READ NEXT:
Components
COMPONENTS ILLUSTRATION *A for RH Side - - *1 REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY *2 REAR SEAT CUSHION MOULDING RH *3 REAR SEAT CUSHION MOULDING RH *4 REAR SEAT HEA
Removal
REMOVAL CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands. PROCEDURE 1. REMOVE REAR SEAT ASSEMBLY Click here 2. REMOVE REAR SEATBACK COVER Click
Inspection
INSPECTION PROCEDURE 1. INSPECT SEPARATE TYPE REAR SEATBACK COVER RH (REAR SEATBACK HEATER ASSEMBLY RH) (for RH Side) (a) Check the separate type rear seatback cover RH (rear seatback heater assemb
SEE MORE:
Removal
REMOVAL PROCEDURE 1. DISCONNECT WIRE HARNESS Click here 2. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR Click here 3. DISCONNECT INVERTER RESERVE TANK ASSEMBLY Click here 4. REMOVE AIR FUEL RATIO SENSOR (a) Remove the radiator hose clamp as shown in the illustration. Push (b) Disco
Thermostat (P0128)
DESCRIPTION This DTC is stored when the engine coolant temperature does not reach 73°C (163°F) despite sufficient engine warm-up time having elapsed. DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory P0128 Thermostat All of the following conditions are met
© 2016-2026 Copyright www.lexunx.com
