Lexus NX: Steering Gear
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 FRONT FLOOR COVER CENTER LH *2 NO. 1 ENGINE UNDER COVER *3 REAR ENGINE UNDER COVER LH *4 REAR ENGINE UNDER COVER RH ILLUSTRATION *1 FRONT STABIL
Removal
REMOVAL PROCEDURE 1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD 2. SECURE STEERING WHEEL (a) Secure the steering wheel assembly with the seat belt in order to prevent rotation. HINT: This operation i
Disassembly
DISASSEMBLY PROCEDURE 1. FIX STEERING GEAR ASSEMBLY (a) Using SST, fix the steering gear assembly. SST: 09612-00012 HINT: Apply protective tape to SST before use. *a Protective Tape
SEE MORE:
Inspection
INSPECTION PROCEDURE 1. INSPECT FRONT CENTER ULTRASONIC SENSOR (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 4 (BI) - 6 (EI) Always 10 kΩ or higher 4 (BI) - 1 (BO) Always Below
Reassembly
REASSEMBLY PROCEDURE 1. INSTALL NUT (a) Install the 2 nuts. 2. INSTALL RADIATOR GRILLE EMBLEM (a) Attach the claw and guide to install the radiator grille emblem. (b) Install the 2 screws. 3. INSTALL NO. 3 RADIATOR GRILLE GARNISH (a) Attach the 4 claws to install the
© 2016-2026 Copyright www.lexunx.com
