Lexus NX: Condenser
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 COOLER CONDENSER ASSEMBLY *2 COOLER DRYER *3 DISCHARGE HOSE SUB-ASSEMBLY *4 LIQUID PIPE SUB-ASSEMBLY *5 NO. 1 COOLER CONDENSER CUSHION *6 O-RIN
Removal
REMOVAL PROCEDURE 1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM Click here 2. REMOVE RADIATOR ASSEMBLY Click here 3. REMOVE FRONT BUMPER COVER (a) for Sport Package: Click here (b) except Spo
Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE NO. 1 COOLER CONDENSER CUSHION (a) Remove the 2 No. 1 cooler condenser cushions from the cooler condenser assembly. 2. REMOVE COOLER DRYER (a) Using a
SEE MORE:
Shift Paddle Switch Circuit
DESCRIPTION When the shift lever is in S, the shift range position can be changed freely using the shift paddle switch of the transmission shift switch assembly. WIRING DIAGRAM PROCEDURE 1. READ VALUE USING TECHSTREAM (SPORT UP SHIFT SENS STATE, SPORT DWN SHIFT SENS STATE) (a) Connect the
Blind Spot Monitor Master Module Beam Axis Inspection Incomplete (C1ABB)
DESCRIPTION This DTC is stored when a beam axis inspection has not been performed for the blind spot monitor sensor LH. HINT: This DTC is always stored after replacing a blind spot monitor sensor. The purpose of this DTC is to ensure that beam axis inspection is performed. Completing the beam axis i
© 2016-2026 Copyright www.lexunx.com
