Lexus NX: Front Bumper (except Sport Package)

Lexus NX Service Manual / Vehicle Exterior / Exterior Panels / Trim / Front Bumper (except Sport Package)

READ NEXT:

 Components

COMPONENTS ILLUSTRATION *1 FRONT BUMPER ASSEMBLY *2 FRONT FENDER FRONT SPLASH SHIELD LH *3 FRONT FENDER FRONT SPLASH SHIELD RH *4 RADIATOR GRILLE PROTECTOR *5 RADIATOR SUPPOR

 Removal

REMOVAL CAUTION / NOTICE / HINT HINT: When the front bumper is damaged or deformed due to an accident or contact with other objects, etc., or the bumper installation area on the body is repaired, it i

 Disassembly

DISASSEMBLY PROCEDURE 1. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System) Click here 2. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)

SEE MORE:

 Control Module Communication Bus OFF (U0073,U0124,U0129,U0293)

DESCRIPTION The parking brake ECU assembly communicates with the hybrid vehicle control ECU, skid control ECU (brake booster with master cylinder assembly) and deceleration sensor (airbag ECU assembly) via CAN communication. DTC No. Detection Item DTC Detection Condition Trouble Area Memo

 Installation

INSTALLATION PROCEDURE 1. INSTALL NO. 2 COOLING FAN MOTOR (a) Attach the 2 clamps and install the No. 2 cooling fan motor with the 3 screws. Torque: 3.9 N·m {40 kgf·cm, 35 in·lbf} (b) Install the cooling fan motor insulator to the fan shroud with the 2 screws. Torque: 2.6 N·m {27 kgf·cm, 23 i

© 2016-2026 Copyright www.lexunx.com